I-SUS316 i-Checkered Sheet / i-SS 304 iPleyiti efakwe i-embossed

I-SUS316 i-Checkered Sheet/SS 304 ebossed Ipleyiti eFakelwe umfanekiso

Inkcazelo emfutshane:

I-Stainless Steel Checkered Plate yolunye uhlobo lokugqiba olukhoyo kwiipleyiti zensimbi ezingenasici.Insimbi engenasici yenye yezona zinto zisetyenziswa kakhulu kwimibhobho, iipleyiti, amaphepha kunye neekhoyili kwihlabathi.Kukho amabanga ahlukeneyo, iinkcukacha kunye nemilinganiselo.I-JINBAICHENG METAL ngumvelisi ohamba phambili kunye nomthengisi we-Stainless Steel Checkered Plate kuwo onke amabakala ahlukeneyo kunye nemilinganiselo.Kukho iipleyiti eziqhelekileyo ze-ASTM, i-JIS kunye ne-AISI.Amabakala ezinto eziphathekayo ahluka njenge-304, 304L, 301, 201, 310S, 309S, 316L, 321, 410, 420, 430 njalo njalo.

Thumela i-imeyile kuthi Whatsapp

Iinkcukacha zeMveliso

Iithegi zeMveliso

Itshathi yeNgcaciso yePhepha leCheckered ye-Stainless 316

Iinkcukacha	ASTM A240 / ASME SA240
Into	Iipleyiti zeStainless Steel (Zishushu ziqengqiwe, ziqengqeleka zibandayo)
Umgangatho	JIS, AISI, ASTM, GB, DIN, EN, njl
Umphezulu	I-2B, 2D, BA, NO.1, NO.4, NO.8, 8K, isibuko, i-chequered, i-embossed, i-hairline, i-sand blast, i-Brush, i-etching, njl.
Ububanzi	1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, njl.
Ubude	2000mm, 2440mm, 3000mm, 5800mm, 6000mm, njl.
Ukutyeba	0.3 ~ 10.0mm
Ifom	Iikhoyili, iiFoil, iiRolling, iPhepha eliCwangcisiweyo, iShim Shim, iPhepha elineNgqondi, ipleyiti eneCheckered, iStrip, iiFlethi, engenanto (isangqa), iringi (iFlange)
Isiphelo	I-Hot rolling plate (HR), i-Cold rolled sheet (CR), i-2B, i-2D, i-BA NO (8), i-SATIN (Idibene ne-Plastiki eCatyiswe)
IBanga	ASTM /ASME SA 240 304 , 304l, 304h, 309s, 309h, 310s, 310h, 316, 316l, 316h, 316, 317l ,321, 321h, 309s, 347, 4 0, 904l checkered Icwecwe

I-SS 304 ye-Checkered Plate Ukwakheka koMzimba

IBanga	Ubuninzi (kg/m3)	I-Elastic Modulus (GPa)	I-Mean Coefficient yoKwandiswa kweThermal (μm/m/°C)			I-Thermal Conductivity (W/mK)		Ubushushu obubodwa 0-100°C (J/kg.K)	Ukuxhathisa koMbane (nΩ.m)
IBanga	Ubuninzi (kg/m3)	I-Elastic Modulus (GPa)	0-100°C	0-315°C	0-538°C	kwi-100°C	ku-500°C	Ubushushu obubodwa 0-100°C (J/kg.K)	Ukuxhathisa koMbane (nΩ.m)
I-SS ihlolwe i-304/L/H Iphepha	8000	193	17.2	17.8	18.4	16.2	21.5	500	720
I-Stainless Steel Checkered 316 / L / H iiPlati	8000	193	15.9	16.2	17.5	16.3	21.5	500	740

Umgangatho we-ASME SA240 316 weCheckered Plate yeMichiza

IBanga	C	Mn	Si	P	S	Cr	Ni	N	Fe
I-Stainless Steel Checkered 304 Plates	0.07 ubuninzi	2.0 ubuninzi	0.75 ubuninzi	0.045ubuninzi	0.03 ubuninzi	umz: 18.0 max: 20.0	umz: 8.0 max: 10.5	-	-
I-Stainless Steel Checkered 304L Amaphepha	0.03 ubuninzi	2.0 ubuninzi	0.75 ubuninzi	0.045ubuninzi	0.03 ubuninzi	umz: 18.0 max: 20.0	umz: 8.0 max: 12.0	0.10 ubuninzi	-
I-Stainless Steel Checkered 304H Ikhoyili	umz: 18.0 max:20.0	umz: 8.0 max: 10.5	umz: 0,04 max:0.10	0.75 ubuninzi	2.0 ubuninzi	0.045 ubuninzi	0.03 ubuninzi	0.10 ubuninzi	-
Insimbi engenaStainless Checkered 316 Foil	Min	-	-	-	0	-	16.0	10.0	-
Insimbi engenaStainless Checkered 316 Foil	Max	0.08	2.0	0.75	0.045	0.03	18.0	14.0	0.10
Iipleyiti ze-Stainless Steel Checkered 316L	Min	-	-	-	-	-	16.0	10.0	-
Iipleyiti ze-Stainless Steel Checkered 316L	Max	0.03	2.0	0.75	0.045	0.03	18.0	14.0	0.10
I-Stainless Steel Checkered 316H Iphepha	Min	0.04	0.04	0	-	-	16.0	10.0	-
I-Stainless Steel Checkered 316H Iphepha	max	0.10	0.10	0.75	0.045	0.03	18.0	14.0	-

Stainless Steel Checkered Plate Mechanical Amandla

IBanga	Amandla e-Tensile (MPa) min	Amandla eSivuno 0.2% Ubungqina (MPa) min	Ubude (% kwi-50mm) min	Ukuqina
IBanga	Amandla e-Tensile (MPa) min	Amandla eSivuno 0.2% Ubungqina (MPa) min	Ubude (% kwi-50mm) min	Rockwell B (HR B) max	Brinell (HB) max
304	515	205	40	92	201
304L	485	170	40	92	201
304H	515	205	40	92	201